Drawings

17 July 2006

Home
One level Up
Overview
Spar trouble
Drawings
Mods

 

This is a complete list of all available drawings (up to now, see date in top right hand corner). All drawings on this list are factory original and currently stored together with the archives of Vliegclub Teuge (Gliding Club Teuge), and managed by Roy Wassink. Also Charles Munnig Schmidt owns original drawings and drawings from both are available on request. Robert Smits has some drawings available as digital photographs of the original drawings.

bulletSagitta bouwtekeningen vliegclub Teuge (factory drawings at the Gliding Club)
bullet14-12-1960       31-00 Hoogteroer (elevator)
bullet15-12-1960       Staartpunt + rib staart slof (tail end with skid, rib and tail cone)
bullet21-02-1961       50-30 Montage hoofdbeslag op ligger (main pin fittings on main spar)
bullet22-04-1961       50-01 HOOFDLIGGER (main spar)
bullet30-03-1962       10-09 Kielligger (keel spar)
bullet14-08-1962       50-31 Hoofdbeslagen en vleugel-romp verbinding (main pin fittings and wing/fuselage fittings)
bullet01-03-1963       50-10 BESTURINGSBESLAGEN (control fittings)
bullet10-09-1964       Aanvulling op 10-33 Samenstelling knuppelhuis (addition to 10-33, construction of control column)
bullet14-09-1964       Aanvulling op 50-00 Ondersteuning voor stootstang rolroer in rib 3650 (Addition to 50-100, support for aileron control rod in rib 3650)
bullet19-06-1964       Mod voetenstuur van de Sagitta. (rudder pedal modification Sagitta)

 

bulletOther relevant documents
bullet List of drawings

 

Home | History | Serial Numbers | Technical Information | Photo Gallery | Feedback | Links | Modellers

This site was last updated 05-Jul-2005